Epson 3865X Plus - Manual (Page 75)

Note
If you do not know the correct password, see “Password
Problems” in Appendix D,
Changing a Power-on Password
To change your power-on password, follow these steps:
1. If you do not have a hard disk, insert your Startup diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
After the slash, enter the new password you want to use. For
example, if your current password is 123 and you want to
change it to ABC, type:
123/ABC
Do not use characters requiring the Shift key, such as
$, @, or *, in your new password. The computer does not
recognize the Shift key when you use your password to
access the system.
The screen does not display what you type.
3. Press Enter. A happy face character appears and then the
computer loads MS-DOS.
3-8 Using Your Computer