Epson 3865X Plus User Manual
Page 64
2. Press Enter
to move the cursor block into the submenu.
You see:
3.
If you want to change the serial port setting, be sure
Serial
is
highlighted and press
Enter.
If you want
to
change the parallel port setting, highlight P a r a l l e l
and press
Enter.
The cursor block moves into the submenu.
4.
Use or to highlight the appropriate setting for the port
you selected and press
Enter.
The screen displays the new
setting.
Note
If you add an option card with a parallel or serial port and
highlight a setting that causes a conflict between your
built-in ports and the port on the option card, you see
this message:
Conflict with option card
Highlight a setting that is appropriate for your system’
configuration and press Enter.
If you want to change the setting
for
the other port, return
to step 3.
5.
When the serial and parallel port settings are correct,
highlight
*** SAVE SETTINGS
*** and press
Enter.
The cursor block returns to the main Setup menu
and you see your updated serial and parallel interface
settings.
Running the Setup Program
2-29