Inserting and removing diskettes – Epson 3865X Plus User Manual
Page 87
Inserting and Removing Diskettes
If you have a 5
diskette drive, insert a diskette as follows:
hold the diskette with the label facing up and the read/write slot
leading into the drive, as shown below.
Slide the diskette into the slot until it is in all the way. Then
turn the latch down to lock it in a vertical position. This keeps
the diskette in place and enables the read/write heads in the
diskette drive to access the diskette.
To remove the diskette, flip up the latch to pop out the
diskette. Carefully pull out the diskette, place it in its protective
envelope, and store it in a proper location, such as a diskette
container.
If you have a 3
diskette drive, insert the diskette with
the label facing up and the metal shutter leading into the drive,
as shown in the following illustration. Slide the diskette into
the drive until it clicks into place.
3-20
Using Your Computer