Epson 3865X Plus - Manual (Page 156)

3. Type DS2V600 and press Enter.
4. Press F6 and then Enter.
Configuring AutoCAD
The first time you use AutoCAD with the driver, you need to
configure AutoCAD for an ADI display. Follow the steps below:
1. Select Configure AutoCAD from the AutoCAD
main menu.
2. When the program displays the current configuration (if
a n y ) , s e l e c t C o n f i g u r e v i d e o d i s p l a y .
3. Select ADI as your new driver. (The menu indicates that
this is installed at interrupt 7A hex.)
4. Save the new configuration and return to the main menu.
Autodesk AutoCAD, Version 9.0
The AutoCAD drivers conform to the Autodesk Device
Interface (ADI) for rendering and display drivers. Epson
provides the following resolutions for version 9.0 of AutoCAD:
640
x
480 16-color graphics (R3V1480.EXE)
800
x
600 16-color graphics (R3V1600.EXE).
Using the VGA Utilities A-11