Selecting an option – Epson 3865X Plus User Manual

Page 295

Selecting an Option

When you are using the System diagnostics program, you

often

need to select an option from a menu. There are two ways to do

this:

You can use the arrow keys

to move the

highlighted cursor block to the option you want and then

press

Enter to

select it.

You can type the number of the desired option and press

Enter to

select it.

For example, you may see this menu:

1 - Run test one time

2 - Run test multiple times

- Exit

Suppose the first option is highlighted. If you want to select that
option, just press

Enter

(because it is already highlighted). If

you want to select option 2, you can either press or 2; this

causes

the cursor block to move to that option. Then press

Enter to select it.

Therefore, when you select an option, you can either use

to highlight the option or you can type the number of

the option. Then press Enter.

must press

Enter to start

the operation.)

Note

You can press E

any time you want to leave the menu

currently displayed and return to the previous one.

E-4

Performing System Diagnostics