Epson 3865X Plus - Manual (Page 56)

You can enter the drive type in one of two ways:
You can type the drive type number (listed in The Hard
Disk Drive Types table) and press Enter. The screen
displays the new number and hard disk settings. (You
cannot type 00 or a drive type number that has more
than three digits.)
You can use the cursor keys to move through the drive
type numbers, as follows:
increases the drive type number one
number at a time
decreases the drive type number one
number at a time
PgDn increases the drive type number in
increments of 10 (for example, from
47 to 57)
PgUp
decreases the drive type number in
increments of 10 (for example, from
47 to 37)
Home enters drive type 1 (the first available
drive type)
End enters drive type 63 (the last
available drive type)
This is a handy way to verify new hard disk settings
before you press
Enter because the settings list is
automatically updated as you display each new type
number.
After you enter the appropriate drive type number, press
Enter. The screen displays the new number and hard disk
settings. Go to step 8.
Running the Setup Program
2-21