Epson 3865X Plus - Manual (Page 142)

5. Turn the large screw on the back panel clockwise to secure
the cover to the computer.
6. Reconnect the computer to the monitor, printer, keyboard,
and any other peripherals you have.
7. Reconnect the power cable to the back of the computer and
to an electrical outlet.
Post-installation Setup for Memory Cards
After you install an optional memory card in your computer,
you need to configure your computer to use it. Follow these
guidelines:
Run the Setup program on your Reference diskette to
automatically reset your computer’s configuration to include
the memory on your memory card. See Chapter 2 for
instructions.
Use the setup program that comes with your memory card
to configure the computer for use with your particular
memory card. See your memory card manual for
instructions. If you installed the RampagePlus® 286
memory card, see “Using the CORFIX Program,” below,
before running the setup program that comes with the
memory card.
If you installed a memory card and you want to use any of
its memory as expanded memory, see “Using Expanded
Memory Beyond 640KB” in Chapter 4.
Also see “Post-installation Setup,” below, for more information
on setting up your computer for use with an option card.
5-36
Installing and Removing Options