Epson 3865X Plus - Manual (Page 160)

You can install the driver automatically each time you turn on
or reset your computer by placing the command in your
AUTOEXEC.BAT file. To modify the AUTOEXEC.BAT file
to load the 800
x
600, 16-color graphics driver, follow these
steps:
1. Type C : \ and press Enter to log onto the root directory
of your hard disk.
2. Type the following and press Enter:
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
3. Type R4V1600 and press Enter.
4. Press F6 and then Enter.
Configuring AutoCAD
The first time you use AutoCAD with the driver, you need to
configure AutoCAD for an ADI display.
1. Select Configure AutoCAD from the AutoCAD
main menu.
2. After you see the current configuration (if any), select
C o n f i g u r e v i d e o d i s p l a y .
3. Select ADI display v4.0 as your new driver. (The
menu indicates that this is installed at interrupt 7A hex.)
4. Save the new configuration and return to the main menu.
Using the VGA Utilities A-15