ProSoft Technology PTQ-PDPMV1 - Manual (Page 99)

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Unity Pro
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 99 of 306
August 12, 2014
3.5.11 Coldboot Mailbox
Important: The Coldboot mailbox is only supported on PTQ-PDPMV1 modules running firmware
version 1.19 or newer. Earlier versions of the firmware do not support this feature. If you require
this functionality, please contact ProSoft Technical Services for information on how to upgrade your
module.
Function Block: COLDBOOT
Trigger Byte: ColdBoot
Description: The COLDBOOT function block allows you to remotely reboot the
module. To trigger a reboot of the module, change the value of the Coldboot bit
from 0 (zero) to 1 (one). The bit is reset back to 0 when the function is executed.
HSBY Note: This function block will reset both the local (active) Master and the remote
(passive) Master.