ProSoft Technology PTQ-PDPMV1 - Manual (Page 247)

PTQ-PDPMV1 ♦ Quantum Platform Reference
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 247 of 306
August 12, 2014
9.1.4 Functional Specifications
 Easy-to-use drag and drop Busview configuration interface via ProSoft
Configuration Builder software (see PSW-PCB Datasheet)
 Monitoring and modification of process data and DPV1 acyclic data with
online slave diagnostics
 Supports PROFIBUS PA slaves on the network through DP/PA coupler or
link
 Supports up to 125 slave devices with repeaters
 Supports extended diagnostic data (DPV1)
 Supports all standardized baud rates, up to 12 Mbits/s
 Auto baud detection at all valid PROFIBUS DPV1 rates
 Supports PROFIdrive 3.1 compliant parameter read and write operations
 Supports Sync and Freeze commands
 Alarm indications and confirmations handling (DPV1)
 Supports Multicast and Broadcast telegrams (DPV1)
 CRC checksum determination of slave configuration consistency to processor
 FDT/DTM PROFIBUS Master transport communication DTM software
included (Product Number PSW-CDTM-PDPM)
Hot Standby
 Hot Standby features support the SE 140 671 CPU
 Supports up to six PTQ-PDPMV1 Hot Standby modules per rack
 Diagnostic and status words are provided for Active Primary and Passive
Secondary Master health status
 PROFIBUS switchover time will be nominal 100 ms not to exceed
300 milliseconds
 Cable break detection with segmented network slave quantity information
 PROFIBUS health messages are generated from secondary Master via FDL
ping services
 No setup parameters required. Module automatically detects Hot Standby
system
Physical
 PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector
and isolated Opto-Couplers
 Master Status LED Indicators for Operations, Network Drop Communication,
Master Token-Hold