ProSoft Technology PTQ-PDPMV1 - Manual (Page 168)

Mailbox Messaging PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 168 of 306 ProSoft Technology, Inc.
August 12, 2014
Data [1 … n]
Returned data.
Fault Information and Extended Fault Information
If "Invalid Other" is returned in the Message Information word in the header of the
response, information about the fault can be found here.
Fault Information Extended Fault Information Contents
0100h Address out of range -
0A00h Failed to execute request Refer to Return Codes (page 181).
0B00h Remote station failure
1000h Remote station DPV1 failure Function_Number
1100h Length out of range (>240 bytes) -
1200h Slave does not support DPV1 -
1300h Slave not active or not present in
configuration -
FE00h Command not possible in "Class 2-Only"
mode -
FF00h Module offline (not initialized or no valid
database) -
Error Decode, Error Code 1 and Error Code 2
If "Fault Information" contains error code 1000h, more information according to
the DPV1 specification can be found here.
6.2.7 Mailbox Message: Acyclic Data Write: Class 1
This command initiates a DPV1 Class 1 acyclic write request. Refer to EN50170
(DPV1) for more information.
Parameter Description
Command Initiator Application
Command Name MSAC1 WRITE
Command Number 2100h
Fragmented No
Extended Header Data Fault information may be returned in the header of the response.