beautypg.com

ProSoft Technology PTQ-PDPMV1 User Manual

Page 245

background image

PTQ-PDPMV1 ♦ Quantum Platform

Reference

PROFIBUS DP Master Network Interface Module for Quantum

User Manual

ProSoft Technology, Inc.

Page 245 of 306

August 12, 2014

4 Existing PROFIBUS networks: PROFIBUS network baud rates greater than

or equal to 500 kBaud are recommended to obtain a < 300 ms switchover
time, based on an average processor scan time of 100 ms. For example, the
switchover time for a network running 8 slaves utilizing 700 words input cyclic
data and 700 words output cyclic data running at 500 kBaud with a processor
scan time of 100 ms is around 218 ms. Please note Hot Standby units will
increase the network token time as much as double because of two Masters
communicating on the network.

5 Module configuration network: The module requires Ethernet connectivity

to operate properly. The modules use UDP messaging between each other to
back up data in status registers used by the processor logic files to determine
switchover conditions in the event PROFIBUS FDL ping messages fail (cut-
cable).

9.1.1 Hot Standby Support

The module provides support for 140CPU6716000 Hot Standby processor with
Unity Pro programming software. Look for the HSBY (Hot Standby) icon

for

special notes relating to the support and configuration of the module.

HSBY Note: For detailed understanding of HSBY specification, refer to the Hot Standby

Addendum.

9.1.2 General Specifications

 Single slot - Quantum backplane compatible
 The module is recognized as an Options module and has access to PLC

memory for data transfer

 Configuration data is stored in non-volatile memory in the ProTalk

®

module

 Configuration software for Microsoft Windows XP, 2000 and NT is included

with the module

 Up to six modules can be placed in a rack
 Local rack - The module must be placed in the same rack as the processor
 Compatible with all common Quantum programming packages, including

Concept (version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX
(version 2.20 or later) (HSBY only available with Unity Pro environment)

 Quantum data types supported: 3x, 4x
 High speed data transfer across the backplane provides quick data update

times

 Sample ladder file available