ProSoft Technology PTQ-PDPMV1 - Manual (Page 173)

PTQ-PDPMV1 ♦ Quantum Platform Mailbox Messaging
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 173 of 306
August 12, 2014
Command and Response Layout: Set Operating Mode
Command Response
Message ID (ID) (ID)
Message information 0240h 0200h
Command 0200h 0200h Set Operation Mode
Data size 0000h 0000h
Frame count 0100h 0100h
Frame number 0100h 0100h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Conf Req Req Mode Conf. Req Act. mode.
Extended word 2 - -
Extended word 3 - -
Extended word 4 - -
Extended word 5 - -
Extended word 6 - -
Extended word 7 - Appl. Specific Error Code
Extended word 8 - Fault Information
Mode
40h: STOP
80h: CLEAR
C0h: OPERATE
Conf. Req.
00h: Confirmation is not required
01h: Confirmation required. All confirmations are automatically sent by the
Master; the user is not required to send a confirmation message.
Fault Information
If "Invalid Other" is returned in the Message Information word in the header of the
response, information about the fault can be found here. Refer to Return Codes
(page 181) for more information.
0100h: Invalid operating mode
FF00h: Module not initialized