ProSoft Technology PTQ-PDPMV1 - Manual (Page 110)

Configuring the Processor with Concept 2.6 PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 110 of 306 ProSoft Technology, Inc.
August 12, 2014
3 If you use the same filename as the ones PCB generated (PTQ-
PDPMV1_sample) you will see the following message:
Click OK to dismiss the warning message.
Next, you will see the following message box:
This message does not indicate an error condition, because the ASC files
were built with a different DTY file, which was overwritten with the new DTY
file exported by PCB. The new DTY file has all I/O information for cyclic data
and (optional) slave diagnostics.
If you use a different filename than the one generated by PCB (for example
Processline1_Master) you will see the following message when you attempt
to import the new ASC file.
Click OK to dismiss the message. After importing all .ASC files, delete the old
DTY file (PTQ-PD~1.dty). The old DTY file does not contain any Cyclic I/O
data.