ProSoft Technology PTQ-PDPMV1 - Manual (Page 89)

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Unity Pro
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 89 of 306
August 12, 2014
You can add SETOPERMODE to the table with three trigger variables for the Set
Operating Mode mailbox. Start by moving a value of 1 to SelectStop in order to
set the module’s mode to STOP.
At this point, you should notice the following LED display, indicating that the
module’s mode was changed to STOP:
LED Status
MSTR STAT RED
COM STAT OFF
DBASE STAT GREEN
TK HOLD GREEN
You will also notice that the function block automatically clears the trigger byte
after it receives the acknowledgment from the module.
Move a value of 1 to the SelectOperate trigger byte.