ProSoft Technology PTQ-PDPMV1 - Manual (Page 234)

Diagnostics and Troubleshooting PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 234 of 306 ProSoft Technology, Inc.
August 12, 2014
Viewing Block Transfer Statistics
Press [B] from the Main menu to view the Block Transfer Statistics screen.
Use this command to display the configuration and statistics of the backplane
data transfer operations between the module and the processor. The information
on this screen can help determine if there are communication problems between
the processor and the module.
Tip: Repeat this command at one-second intervals to determine the number of blocks transferred
each second. If the module is communicating over the backplane correctly, you will see these block
numbers change each time you refresh the display.
HSBY Note: The Quantum 140CPU67160 processor control word %SW61 is displayed for
HSBY processor status.
Viewing Module Configuration
Press [C] to view the Module Configuration screen.
Use this command to display the current configuration and statistics for the
module.
Opening the Input Data View Menu
Press [I] to open the Input Data View menu. Use this command to view the
contents of the input database. Refer to Input Data View Menu for information on
the commands on this menu.
Opening the Output Data View Menu
Press [O] to open the Output Data View menu. Use this command to view the
contents of the input database. Refer to Output Data View Menu for information
on the commands on this menu.