ProSoft Technology PTQ-PDPMV1 - Manual (Page 226)

Diagnostics and Troubleshooting PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 226 of 306 ProSoft Technology, Inc.
August 12, 2014
The following table shows some of the possible status indicators:
Processor
Status PTQ Module
Status PROFIBUS
Master Status PROFIBUS Master Status LED
Description
Normal Operation RUN (ON) ACTIVE (ON) COM STAT (GREEN/Solid or Flash):
Master is communicating with slaves (Solid
GREEN) or at least one (Blinking).
DBASE STAT (GREEN):
PROFIBUS has been configured.
TKN HOLD (GREEN):
PTQ is holding the PROFIBUS token.
MSTR STAT (GREEN):
Master is in OPERATE mode.
PTQ module not
communicating
with processor
PTQ module
rebooted for
DEBUG only
(HSBY) RUN (ON) or
STOP ACTIVE (OFF) COM STAT (OFF):
Master is not communicating with slaves.
DBASE STAT (GREEN):
PROFIBUS has been configured.
TKN HOLD (OFF):
Master does not have the token and is
inactive.
MSTR STAT (OFF):
Master is inactive.
HSBY: After the
hot swap of the
module, the PTQ
module is
correctly SET as
the remote
(passive) Master. RUN (ON) ACTIVE (ON) COM STAT (GREEN/Solid or Flash):
Master is communicating with slaves (Solid
GREEN) or at least one (Blinking).
DBASE STAT (GREEN):
PROFIBUS has been configured.
TKN HOLD (GREEN):
PTQ is holding the PROFIBUS token.
MSTR STAT (RED Blinking):
Master is in remote (passive) Master mode.
PTQ PROFIBUS
Master is stopped RUN or STOP ACTIVE COM STAT (OFF):
Master is not communicating with
configured slaves.
DBASE STAT (GREEN):
PROFIBUS has been configured.
TKN HOLD (GREEN):
PTQ is holding the PROFIBUS token.
MSTR STAT (RED):
Master is in STOP mode.
CPU is stopped STOP ACTIVE COM STAT (OFF):
Master is not communicating with
configured slaves.
DBASE STAT (GREEN):
PROFIBUS has been configured.
TKN HOLD (GREEN):
PTQ is holding the PROFIBUS token.
MSTR STAT (RED):
Master is in STOP mode.