ProSoft Technology PTQ-PDPMV1 - Manual (Page 163)

PTQ-PDPMV1 ♦ Quantum Platform Mailbox Messaging
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 163 of 306
August 12, 2014
Command and Response Layout: Set Slave Address
Command Response
Message ID (ID) (ID)
Message information 0240h 0200h
Command 0600h 0600h Set Slave Address
Data size (Size of data) (Size of data) No. of Slave Data bytes (n)
Frame count 0100h 0100h
Frame number 0100h 0100h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 New Slave
Address
Current
Slave Addr.
New Slave
Address
Current
Slave Addr.
Extended word 2 Slave Ident Number Slave Ident Number
Extended word 3 No_add_
Chg
- No_add_
Chg
Extended word 4 - -
Extended word 5 - Error Code 2 Error Code 1
Extended word 6 - Error Code 4 Error Code 3
Extended word 7 - Return Code
Extended word 8 Fault Information
Message Data byte 1 Slave Data 1 Slave Data 1 (slave data will appear byte
swapped)
Message Data byte 2 Slave Data 2 Slave Data 2
Message Data byte 3 Slave Data 3 Slave Data 3
... ... ...
Message Data byte "n" Slave Data n Slave Data n
Message Information
Refer to Message Information (page 180).
Current Slave Address
Range 1 to 125; specifies the current address of the slave.
New Slave Address
Range 1 to 125; specifies the new address of the slave.
Slave Ident Number
Ident number for the slave, which address should be altered.