ProSoft Technology PTQ-PDPMV1 - Manual (Page 55)

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Module
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 55 of 306
August 12, 2014
3 Unity Pro Users: From the PROFIBUS Master Setup Screen, click the S HOW
U NITY M AP button, then click the E XPORT P ROCESSOR F ILES button. This
action exports the xfm file (created only if the Mailbox parameter is set to
Y
ES ) and xsy file. The recommended location for these files is your My
Documents folder.
If you are using Unity 7.X or later, you will use the PTQ-PDPMV1.xfm and
PTQ-PDPMV1.xsy files.
If you are using Unity 2.X to 6.X, you will use the PTQ-PDPMV1_V2.X-
6.X.xfm and PTQ-PDPMV1_V2.X-6.X.xsy files.
Concept Users: From the PROFIBUS Master Setup Screen, click the S HOW
C ONCEPT MAP button, and then click E XPORT P ROCESSOR F ILES . This action
exports the DTY and related files. The recommended location for these files
is your My Documents folder.
4 From the PROFIBUS Master Setup dialog box, click the S HOW C ONCEPT MAP
button. Then choose E XPORT P ROCESSOR F ILES to export the DTY, TXT and
other related files if the Mailbox parameter is set to Y ES . The recommended
location is your My Documents folder.
5 Click OK to close the PROFIBUS Master Setup dialog box.
6 In the ProSoft Configuration Builder, open the F
ILE menu, and then choose
S AVE A S .
7 Name the project file, and click S AVE . The recommended location for this file
is your My Documents folder.
Note: All PCB project files and module-related files are automatically saved to C:\PCBExportFiles.
A complete backup consists of the project and Master configuration files, plus the
GSD configuration files. The default location for the GSD files is C:\Documents
and Settings\All Users\Application Data\ProSoft\GSD (Windows XP / 2000) or
C:\My Documents\. To move a project to a different PC, copy the .PPF, .XML,
and .GSD files to the same directory structure on the new machine that they
occupied on the old one.
The above method defines a manual approach in creating Quantum processor
I/O and Function Block import files. The PCB will also automatically create these
files when the PCB project is saved or closed (if the project is not saved then
PCB will not export the files).
You can also generate these files manually from PCB. To create the files:
1 Open the P ROJECT menu, and select P ROJECT > E XPORT F ILES .
2 If you are prompted to overwrite files, click Y ES .