ProSoft Technology PTQ-PDPMV1 - Manual (Page 103)

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Concept 2.6
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 103 of 306
August 12, 2014
4.2 Before You Begin
1 Verify that your computer has the following software tools installed:
o ProSoft Configuration Builder (version 2.0.0 Build 15 or later)
o Concept Programming Unit (version 2.6 or later)
2 Create a folder C:\project\DFB, where:
C:\project - will store the main Concept project (.PRJ)
C:\project\DFB - will store the data type definition file (.DTY) and the function
blocks that will be used by the Concept project.
Warning: The Function Block is intended for new installations of PTQ-PDPMV1. If you have an
existing installation, the following procedure will overwrite your settings, and may cause loss of
functionality. DO NOT overwrite a working application until you have thoroughly reviewed the
following topics.