ProSoft Technology PTQ-PDPMV1 User Manual
Page 270
Reference
PTQ-PDPMV1 ♦ Quantum Platform
User Manual
PROFIBUS DP Master Network Interface Module for Quantum
Page 270 of 306
ProSoft Technology, Inc.
August 12, 2014
For MVI56-PDPMV1 and MVI69-PDPMV1 users with CIPconnect: Select the
CIP
CONNECT
tab, and then click the A
DD
button.
Click the CIP
CONNECT
P
ATH
E
DIT
button to define the path for this application.
The CIPconnect Path Editor allows the configuration of the path between
your PC and the MVI56-PDPMV1 or MVI69-PDPMV1 module.
For the following example, the PC will be connected through Ethernet to a
1756-ENBT communication card (IP=192.168.0.100) and the MVI56-
PDPMV1 card is located in slot 3 of the same rack.
For more information, please refer to Using the CIPconnect Path Editor.
Note: CIPconnect is available for MVI56-PDPMV1 firmware version 1.28.000 (or later) and for
MVI69-PDPMV1 firmware version 1.37.002 (or later). This functionality requires comDTM version
1.0.1.5 with install version 1.01.0003 (or later). For information on how to check the comDTM
version and install version, refer to Verifying the comDTM Version and comDTM Install Version
(page 273).