Yaskawa VS-626 MC5 - Manual (Page 90)

4.2Modes
- 27
Group
Control
Method
Comments Display Function Group
Flux
Vector
Over
Loop
Vector
Comments Display Function
H1 Multi-function inputs Digital Inputs
Function selection for multi-function
inputs
H2 Multi-function outputs Digital Outputs
Function selection for multi-function
outputs
H Terminal H3 Analog inputs Analog Inputs Function selection for analog inputs
H4
Multi-function analog out-
puts
Analog Outputs Function selection for analog outputs
H5
MEMOBUS communica-
tions
Serial Com Setup MEMOBUS communications settings
L1 Motor protection functions Motor Overload
Overload protection settings and selec-
tion
L2
Momentary power loss
ride-through
PwrLoss Ridethru
Selects the power-loss processing meth-
od.
L3 Stall prevention Stall Prevention Stall prevention settings and selection
L Protection
L4 Frequency detection Ref Detection
Frequency detection settings and selec-
tion
L Protection
L5 Fault restart Fault Restart Fault restart function settings
L6 Overtorque detection Torque Detection
Overtorque detection settings and selec-
tion
L7 Torque limits Torque Limit
Torque limit settings (vector control
only)
L8 Hardware protection Hdwe Protection
Overheating and phase loss protection
settings
o1 Display/Monitor settings Monitor Select Selects the display and setting methods.
o Operator
o2 Function settings Key Selections
Key function selection and other user
constants
4