Yaskawa VS-626 MC5 - Manual (Page 231)

8.2 Programming Mode Constants
- 23
H3-05 and H3-09 Settings
Control Methods
Setting Function Contents Open Loop
Vector
Flux Vector
0
H3-05: Auxiliary frequency refer-
ence
Maximum output frequency 0
H3-09: “0” cannot be set
Maximum output frequency
1 Frequency gain
Frequency reference (voltage) com-
mand value
2 Frequency bias
Maximum output frequency (added
to H3-03)
5
Accel/decel change (reduction coef-
ficient) Set acceleration and deceleration
times (C1-01 to C1-08)
6 DC injection braking current Inverter rated output current
7 Overtorque detection level Motor rated torque
9
Frequency reference lower limit lev-
el
Maximum output frequency
A Jump frequency Maximum output frequency
10 Forward torque limit Motor’s rated torque
11 Reverse torque limit Motor’s rated torque
12 Regeneration torque limit Motor’s rated torque
13
Torque reference/torque limit at
speed control
Motor’s rated torque
14 Torque compensation bias Motor’s rated torque
15 Forward/reverse side torque limit Motor’s rated torque
1F
H3-05: Not used (terminal 14: fre-
quency reference) 1F
H3-09: Frequency reference Maximum output frequency
8