Yaskawa VS-626 MC5 - Manual (Page 242)

User Constants
8.2.10 Factory Settings that Change with the Control Method (A1-02)
- 34
8.2.10 Factory Settings that Change with the Control Method (A1-02)
Con-
Name
Setting
Factory Setting
Con
stant
No. Display
Setting
Range Unit Open Loop Vector
A1-02=2
Flux Vector
A1-02=3
b3-01
Speed search selection at start
0 1 1 0 1 b3-01
SpfSrch at Start
0 1 1 0 1
C3-01
Slip compensation gain
0 0 to 2 5 0 1 1 0 1 0 C3-01
Slip Comp gain
0.0 to 2.5 0.1 1.0 1.0
E1--04 Max. output frequency
0 0 to 400 0 0 1 Hz 60 0 60 0
E1 04
E4--01 Max Frequency
0.0 to 400.0 0.1 Hz 60.0 60.0
E1--05 Max. voltage
0 0 to 255 0 0 1 V 200 0 200 0
E1 05
E4--02 Max Voltage
0.0 to 255.0 0.1 V 200.0 200.0
E1--06 Max. voltage frequency
0 0 to 400 0 0 1 Hz 60 0 60 0
E1 06
E4--03 Max Voltage Frequency
0.0 to 400.0 0.1 Hz 60.0 60.0
E1-07 Mid. output frequency
0 0 to 400 0 0 1 Hz 3 0 0 0
E1 07
E4-04
Mid Frequency A
0.0 to 400.0 0.1 Hz 3.0 0.0
E1-08 Mid. output frequency voltage 0.0 to 255.0
0 1 V
11.0
0 0
E1 08
E4-05
Mid voltage A
0.0 to 255.0
(0.0 to 510.0)
0.1 V
11.0
(22.0)
0.0
E1-09 Min. output frequency
0 0 to 400 0 0 1 Hz 0 5 0 0
E1 09
E4-06
Min Frequency
0.0 to 400.0 0.1 Hz 0.5 0.0
Note Values in parentheses are for 400 V class Inverters.
8