Yaskawa VS-626 MC5 - Manual (Page 177)

7.3 Common Functions
- 39
3. Press the Enter Key at the desired constant to select that constant.
At this point, the Increment and Decrement Keys can be pressed to scroll to the available settings for
the selected constant. Press the Enter Key to select the displayed constant setting.
(Press the Escape Key to cancel the operation without changing the constant setting.)
Input level NO Contact
NC Contact
DATA
ENTER
ESC
Set constant
DATA
ENTER
Detection
method
Always
During operation
DATA
ENTER
ESC
Set constant
DATA
ENTER
Operation
selection
Deceleration
to Stop
Coast to Stop
DATA
ENTER
ESC
Set constant
DATA
ENTER
Emergency
Stop
Continue
operation
Fig
7.23 Procedure to Change Constant Settings
7