Yaskawa VS-626 MC5 - Manual (Page 85)

Setting User Constants
4.2.5 Initialize Mode
- 22
Initializing for 2-wire Sequential Operation
Use the following procedure to initialize user constants to the factory settings.
Step Key Sequence Digital Operator Display Remarks
1
MENU
MC5 Main Menu
Operation
2 MC5 Main Menu
Initialize
3 DATA
ENTER
Select Language
English
4
Press 3 times.
Init Parameters
No Initialize
5
DATA
ENTER
A1--03 = 0
No Initialize
6 A1--03 = 2220
2-wire Initial
7
DATA
ENTER Entry Accepted
Writes-in the new setting.
Init Parameters
No Initialize
After a few seconds, the Operator dis-
play is as shown on the left.
The initialization has been completed for a 2-wire sequence.
4
A EXAMPLE "