Yaskawa VS-626 MC5 - Manual (Page 168)

Advanced Operation
7.3.4 Option Constants: F
- 30
Coded Outputs
Bit 3210 Meaning Bit 3210 Meaning
0000 No fault 1000 External fault EF
0001 Overcurrent SC OC GF 1001 Controller fault CPF
0010 Overvoltage OV 1010 Motor overload OL1
0011 Inverter overload OL2 1011 Not used
0100 Inverter overheat OH OH1 1100 Power loss UV1 UV2 UV3
0101 Overspeed OS 1101 Excessive speed deviation DEV
0110 Fuse blown PUF 1110 PG disconnected PGO
0111
Braking Resistor Unit over-
heat RH
Braking Transistor fault RR
1111 Not used.
J Pulse Monitor Card: F7-01
D When using a PO-36F Pulse Monitor Card, set the output pulse in constant F7-01.
User
Change
during Setting Factory
Valid Access Levels User
Constant
Number
Name
during
Opera-
tion
Setting
Range Unit
Factory
Setting Open Loop
Vector Flux Vector
F7-01
Frequency multiple
selection
0 to 4 -- 1 B B
D Settings
Setting Description
0 1F 1 x Inverter output frequency
1 6F 6 x Inverter output frequency
2 10F 10 x Inverter output frequency
3 12F 12 x Inverter output frequency
4 36F 36 x Inverter output frequency
D “F” indicates the output frequency (Hz). For example, if “0” (1F) is set, when the output frequency
is 60 Hz there will be an output of 60 pulses per second. (Duty 50%)
7