Yaskawa MotionWorks IEC Hardware - Manual (Page 74)

MotionWorks IEC Hardware Configuration – 2013-03-26 71
Lower 3
Nibbles
Description
adapter.
0x316 Path and Connection not equal in close
0x317 Either Segment not present or Encoded Value in
Network Segment is invalid.
0x318 Link Address to Self Invalid
0x319 Resources on Secondary Unavailable
0x31A Connection already established
0x31B Direct connection already established
0x31C Miscellaneous
0x31D Redundant connection mismatch
0x31E No more consumer resources available in the
producing module
0x31F No connection resources exist for target path
Note: Do not delete automatically created variables or groups. If you
must delete a group, be sure to delete the group header (an all of its
variables) and the group name as listed under IO_Configuration in the
Hardware tab. These two items must remain in sync for project to compile
properly.