Setting ips with device web pages, Set ip procedure using device web pages – Grass Valley Karrera Video Production Center Installation v.4.1 User Manual
Page 99
KARRERA — Installation & Service Manual
99
Network Configuration
Update All
- (System selected) Updates software to all devices for the selected
system, excluding Menus.
Create CF
- Allows the duplication of a Frame or Control Panel Compact
Flash Card onto another CF Card.
Setting IPs with Device Web Pages
Karrera Video Processor frames and Control Panels have web pages that
can be used to set that device’s IP addresses.
Set IP Procedure Using Device Web Pages
You need to know the current IP address of the Karrera Video Processor
Frame or Control Panel before you can change it using a Web browser,
mouse and keyboard.
Note
The NetConfig application, included with the Karrera software, can be used to
find IP addresses of devices accessible on the network. Refer to the separate
NetConfig Instruction Manual for more information.
1.
Using any web browser connected to your Karrera network, enter the
IP address of the device in the address field and press
Enter
.
Note
A Karrera Video Processor Frame is used as the example in this procedure.
Similar steps can be used on a Karrera Control Panel.
2.
Click on
Frame Network Addresses
(
).