Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 46)

46 KARRERA — Installation & Service Manual
Section 2 — Control Surface Installation
Menu Panel Hardware Installation With Articulated Arm
Figure 21. Fanless PC Mounting Bracket Assembly
Wall Mounting Without Articulated Arm
For flat mounting directly to a vertical surface without using the articulated
arm, two #10 screw sized washers (2.5 mm/0.10 in. thick) can be used at the
lower two “U” bracket screw locations.
8804_24_
r1
Articulated Arm
Mount (rest of
arm not shown)
“U” Bracket “T” Bracket
Touch Screen Menu
Fanless PC
“X” Bracket
Attach lower two
articulated arm
round-head screws next.
Attach four
touch screen
hex screws next.
Slide Fanless PC into
place, then attach
upper two articulated arm
round-head screws last.
B
Attach “X” bracket to
articulated arm mount
with four flat-head
screws first.
A
C
D