Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 243)

KARRERA — Installation & Service Manual 243
Control Panel Maintenance
Note Pressing the Reset button performs a hard reset of the panel processor. The
preferred method is to reset using the EMEM area, which performs a con-
trolled shut-down of the panel software and then reboots the operating
system. The Reset button should only be used if the panel is in a state that
does not allow an EMEM area reset.
Figure 187. Karrera 2-ME Panel Open, Air Guide Removed
8804_32
Power
Supplies (2)
Controller &
Distribution
Board
Input
Cooling
Fan
Air Exhaust
Source Sel 10
Source Sel 10
w/o Device
Control
Source Sel 15
Source Sel 15
w/o System Area
Transition
& DSK Local EMEM
& Transition Master EMEM
Multi-Function