Restoring the default ip address – Grass Valley Karrera Video Production Center Installation v.4.1 User Manual
Page 107
KARRERA — Installation & Service Manual
107
Network Configuration
Figure 67. Typical Karrera System Default IP Address Settings
7.
Check the
Do reset
box at the bottom of the screen, then click on
Save New Settings
. The new IP addresses will be saved and the Remote
Aux Panel will reset. You should label the panel with its IP address and
keep a record of all IP addresses for future reference.
8.
Disconnect the PC, and connect the Remote Aux Panel to the Karrera
system network.
9.
Repeat this procedure on all the Remote Aux Panels to be used with
your Karrera system, entering a unique IP address for each Remote Aux
Panel.
See Remote Aux Panel Registration
regarding additional configu-
ration steps required.
Restoring the Default IP Address
You need to know the current IP address of the Remote Aux Panel in order
to change it using the Web browser. If a panel’s IP address has been
changed and its new value not recorded, it will be impossible to change its