Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 85)

KARRERA — Installation & Service Manual 85
Section
5
Basic Configuration
Introduction
This section provides basic system configuration information for the
Karrera Video Production Center. Refer to the latest Karrera Release Notes for
information specific to your current software version.
Configuration Steps
Karrera basic system configuration includes the following steps:
1. Power up the system.
2. Set IP addresses for your facility (if not using defaults). Node Settings
will also need to be configured for proper system communications (see
page 93 ).
3. If necessary, adjust Control Panel button and display illumination
(
page 111 ).
4. If necessary, calibrate Control Panel lever arms and joystick (see
Maintenance section).
5. Define your basic Engineering Setups. Essential settings include:
• Source Definition (see page 112 )
• Outputs (see page 117 )
• Tally (see page 122 )
6. Define a baseline User Setups (Panel Prefs and Suite Prefs). Important
settings include:
• Button Mapping (see page 151 )
• Source Patching (see page 152 )
• Default Keyframe (see page 152 )
7. Configure external devices with the Karrera system (see
Section 6-External Interfaces).