Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 109)

KARRERA — Installation & Service Manual 109
Registering Karrera System Nodes
Figure 68. Control Surfaces Menu
2. Touch an available set of buttons and enter a Node Name and the IP
address of the Control Panel.
3. You can assign the component to a suite and control surface now if you
wish, but it is recommended to initially configure your Karrera system
as a single suite. Later, you can modify the configuration for multi-suite
operation.
4. If you want that Control Panel button DPOPs (double press open)
button) to affect this Menu Panel, touch
Frame Suite Nodes & ID and enter
the IP address of that Control Panel in the Track DPOPs from Panel ID
field (see
Figure 50 on page 92 ).
5. After making an addition or change, you will need to reset the Control
Panel. This can be done two different ways:
• On the Control Panel Multi-Function Module access the Home
menu, then press
Panl , IP , Boot and press Yes .