Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 147)

KARRERA — Installation & Service Manual 147
Engineering Setups
4. Touch the Camera Source data pad—the Ethernet Connected Camera List
pane is displayed ( Figure 99 ).
Figure 99. Ethernet Connected Camera List, Eng Setup, Source Definition Menu
5. Touch a camera in the Ethernet Connected Camera List.
The Ethernet Connected Camera List pane closes and the selected
camera’s Engineering Name is defined by the selection automatically.
A green
Status LED signifies a connected camera ( Figure 99 ).
Note The Engineering Name of the source becomes “Cam##” and cannot be edited,
however the Panel, OLED, and Menu Name can be changed in the Source
Patch menu (see the
Karrera User Manual for more information).
Acquire Resources
A camera resource can be acquired by Suite 1 or Suite 2 but not both
(E-MEM control is only from the suite currently controlling the camera
source). Camera resources are acquired in the Eng Setup, Acquire
Resources, Camera Control menu (
Figure 100 ).