Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 143)

KARRERA — Installation & Service Manual 143
Engineering Setups
Figure 95. TCP/IP—Enter IP Address
9. Enter the desired IP Address ( Figure 95 ), and click OK .
The Subnet mask will be filled in automatically.
10. Click OK .
Enable the FBWF
1. Enable the FBWF (File Based Write Filter), see Setting the IP Address on
page 130 , Step 1 .
2. Reboot the ClipStore Summit/Solo server.
Camera Control with Ethernet Tally Configuration
The Karrera system uses Ethernet to communicate with the LDK Connect
Gateway (
Figure 96 ). Some basic configuration is required in the Eng Setup
menu.