Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 219)

KARRERA — Installation & Service Manual 219
Router Interface
panel, and so the Karrera system can protect router destinations. Karrera
system router protect commands are applied to all router levels.
Features
• Interfaces to the Grass Valley SMS 7000, Encore, and other routing
systems via Native protocol.
• Karrera system configuration of routed Karrera sources.
• Names of router sources are shown on the Karrera Control Panel and
Karrera Menu Panel displays.
• Router source selection control via the Karrera Control Panel and
Karrera Menu Panel displays.
• Protection types (None, Protect, and On Air).
Router Interface Installation
Control Interface Cabling
Connect an Ethernet cable from a Karrera system Ethernet switch to the
external routing system Ethernet network. The Karrera system can commu-
nicate with devices on different networks via a gateway router. If a gateway
router is not used, the external routing system must be on the same subnet
at the Karrera system.
Video Interface Cabling
Connect each external routing system destination to an available input con-
nector on the Karrera Video Processor Frame. You will need to know the
input connector number used for each destination when you configure the
Karrera source.
External Routing System Configuration
It is assumed the external routing system has already been configured for
basic use in your facility, and only needs to be re-configured to interface
with the Karrera system.