Creating an external device definition – Grass Valley Karrera Video Production Center Installation v.4.1 User Manual
Page 214
214
KARRERA — Installation & Service Manual
Section 6 — External Interfaces
Type
– Chooses a control protocol for the currently selected device.
•
For Ethernet devices, and IP address field is available for entering the
IP address of the External Device (
).
•
For serial control devices, touching a Port button on the right assigns
the selected device to that port (
).
Unassign Ext. Device
– Clears the definition of the selected item.
Creating an External Device Definition
1.
Touch
Eng Setup
,
Ports & Devices
,
External Devices
to go to the External
Device Definition menu.
2.
Scroll through the list of devices on the left and select an available
device.
3.
Touch
Device Name
and enter a descriptive name for the External Device.
4.
Choose the control protocol for that device from the
Type
list.
•
If an Ethernet protocol was selected, enter the IP address for the
External Device.
•
If a serial protocol was selected, choose the port the device will use.