Grass Valley Karrera Video Production Center Installation v.4.1 User Manual
Page 129
KARRERA — Installation & Service Manual
129
Engineering Setups
Figure 80. Tally Relay Assign Menu
Tally Relay Group
- Delegates the Menu controls to configure the selected Tally
Group. The A, B, C, and D Tally Groups correspond to Tally/GPI connec-
tors 1 through 4 on the rear of the Karrera Video Processor Frame.
Calculation Enables
- Assigns the Tally Calculators to the delegated Tally
Group. When a calculator button is off, that calculator’s results will not
trigger relays for that Tally Group.
Note
A calculator must be activated with its Calc On button before it can be
assigned to a Tally Group (see
Assigning Sources to Tally Relays
Sources are assigned to specific relay connectors with the controls on the
upper right.
1.
Touch the button for the desired Relay in the center of the menu.