Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 120)

120 KARRERA — Installation & Service Manual
Section 5 — Basic Configuration
3. The Suite 1 and Suite 2 buttons are used to assign the currently selected
output to a suite. The default setting is Suite 1 .
4. Touch the button of the desired item for the selected output connector
from the list on the right. The change is immediate, and can be viewed
on a connected monitor. (Switched Preview mode does not offer any
output sources to select from).
5. If desired, touch the Output Name data pad to change the name of the
output using the pop up alphanumeric keypad or standard keyboard.
This name appears on the data pad of the scrolling list on the left. Up to
12 characters can be entered.
Aux Bus Configuration
Aux buses can be used to send dynamically selected sources to an output.
Aux bus sources are selected using the Local Aux panel, delegating an ME
for Aux Bus control, or using Remote Aux Panels delegated to control that
Aux bus.
The number of Aux buses on a Karrera system varies, depending on how
the physical outputs have been mapped. Any output that is not configured
as Fixed or Switched Preview is available for use as an Aux bus.