Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 83)

KARRERA — User Manual 83
iDPM Operations
Figure 37. DPM Border Menu
2. Touch to select an ME/Keyer data pad on the left side of the menu (or
use the
Multi select button for multiple keyers).
Note DPMs selected for borders using the Multi select button will each have the
same border values.
3. Turn on DPM Borders by touching either the Square Border or Round Border
button in the Border Enable menu pane ( Figure 37 ).
4. Select a path type by touching the S-Linear, Linear , or Curve data pads in
the Border menu pane ( Figure 37 ).
a. If Curve is selected, the Tension, Continuity, and Bias can be
adjusted using the soft knobs or pop-up keypads.
5. Touch the Width or Softness data pads and use the Size or Softness soft
knobs or pop-up keypads to adjust those values ( Figure 37 ).
Border Color
Adjust the border color by touching the Border Color Adjust data pad (the color
value is displayed in the data pad) and then turning the Border Hue , Border
Saturation , or Border Brightness soft knobs or using the pop-up keypads to
adjust those values ( Figure 37 ).
Note Color is applied to the entire border, there is no independent control.