Grass Valley Karrera Video Production Center v.4.0 User Manual
Page 184
184
KARRERA — User Manual
Section 5 — Device Control
Figure 85. Source Ops, Cameras, Live Ops Menu
Live Ops
Karrera camera control provides the ability to place cameras into a usable
but not fully shaded setup/rehearsal mode using the menu buttons in the
Live Ops menu tab (
•
Camera Sources
—Select from 1-99 defined camera sources for control.
•
Color Bars
—Enable/disable color bars to verify the camera as the associ-
ated source.
•
Auto Iris
—Enable/disable camera’s Auto Iris.
•
Auto Black
—Triggers a reset of camera’s black level.
•
ND (Neutral Density) Filter
— Changes the neutral density filter wheel set-
ting.
Use back and forward arrow buttons (
) to scroll through and
enable 1/4, 1/16, 1/64 filter wheel settings, or CLR to clear the filter
wheel setting.
Ethernet Tally Operations
When installed and configured, the Karrera switcher sends tally over
Ethernet to cameras. This is described in the Karrera Installation & Service
Manual. In addition, the
Red
,
Yellow
, and
Green
buttons in the Source Ops,