Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 141)

KARRERA — User Manual 141
Macros
Playing an Attached Macro
1. Turn on the attachment playback feature by pressing the Att Enable
button so it is illuminated. You may also want to press the Show (Attach)
button so that panel buttons with macros attached can be identified
(they blink low tally).
2. Press the panel button that has the macro attached.
Removing a Macro Attachment
1. Press the Delete button on the System Bar.
1. Press the Show button so that panel buttons with macros attached blink
low tally.
2. Without selecting a macro register, press the blinking button that has
the attachment you wish to remove. The blinking button will turn off.
3. Press Show to turn off the mode.
To remove all macros, go to the Macros Attach menu and select Remove All
Macros button (warning will appear to confirm remove all).
Appending to a Macro with the Control Panel
1. Turn on Macro append mode by double pressing the Record button.
2. Press the macro register button on the delegated keyer row of an
existing macro to which you wish to append additional steps.
3. Perform the additional steps using the Control Panel and/or the
menus.
4. Complete the append by pressing the blinking Record button, or
pressing the blinking keyer row macro register button.
Appending to a Macro in the Menu
1. Go to the Macros Catalog menu (press Macro , Catalog ).
2. Touch the Macro Register number button of the register you wish to
record additional steps into.
3. Touch the Append button.
4. Perform the additional steps, using the Control Panel and/or the
menus.
5. Touch the Stop button to end the macro append.