Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 213)

KARRERA — User Manual 213
Transitions
Figure 106. Resource Allocation Menu
Trans Lock Button
The Trans Lock button in the Source Ops, Aux Buses menu ( Figure 107 )
allows you to lock the selected mix or wipe as the transition type for the
selected aux bus (repeats when a source is taken on that aux bus). By
turning on the
Trans Lock button, the transition will continue to mix or wipe
until it is deselected. With the Trans Lock button off, a mix or wipe will only
transition once and then reset to a cut (cut is the default setting for an aux
bus).