Choose load, Update show, Load show – Grass Valley Karrera Video Production Center v.4.0 User Manual

Page 45

KARRERA — User Manual

File Operations

CAUTION The Eng Setup button is off by default as ports and server IPs are unique so

transferring Show files from one location to another (including suites)
requires planning to prevent interruption.

Go to the File Ops, Show Files menu.

Select the

Create Show

button in the Show Create & Load pane (bottom-

center).

In the Create Show pane, touch to select/deselect file types, or touch
the

Select All

button (e-DPM is an option, if not installed the button will

be inactive).

Select the register data pad (left of each button) and enter a series or
range of registers to be included in the Show file (the default is

all

Touch the

Create

button in the Create Show pane.

Choose Load

Pressing

Choose Load

brings up a pane that allows you to see what files are

contained in the Show, and select which files to load. Buttons for files not
present are grayed out. By default all the files in the Show are selected for
load. The controls in this pane operate the same as the Create Show, except
the

Load

button replaces the Create button.

Specify the file types and ranges of files you wish to load, then touch the

Load

button.

Turning on the

Clear and Replace

button removes all files and replaces them

so you can limit what is loaded to what is in the Show file and not a cumu-
lative load/overwrite.

Update Show

Touching the

Update Show

button

brings up a pane that allows you to select

specific files within a show to update. Specify the file types and ranges of
files you wish to update, then touch the

Update

button. The selected files in

the show will be overwritten with the current Karrera settings for those
items.

Note

A best practice is to set the E-MEM range from 0-999 each time there is an
update, this will ensure that new registers are included (the same practice can
be applied to other file types).

Load Show

Touching the

Load Show

button immediately loads all the files in the cur-

rently selected show into the Karrera system. This operation will overwrite
the existing settings that are currently being used. While the current work
buffer and video outputs will not be affected, other aspects of system oper-