Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 67)

KARRERA — User Manual 67
MEs and Keyers
4. Go to the Keyer-Priority menu in the Menu Panel by pressing Keyer ,
Priority .
5. The current stack in the menu is automatically set to what is currently
being output. You can change the Current priority stacking order if
desired, as described on
page 66 .
6. Set up the Next priority stacking order, selecting the keyers in the Next
column and then using the
Top , Move Up , Move Down , and Bottom buttons
( Figure 28 ). The new stack will be visible on the preview monitor.
Figure 28. Keyer Priority Menu, Next Stack Selected
7. Select the type of transition, using the Mix , Wipe 1 , or Wipe 2 buttons in
the Transition area. If you selected a wipe, go to the Wipes menu by
double pressing one of the
Wipe buttons, and then select the pattern and
any modifiers to be used with the wipe.
8. Move the lever arm or press the Auto button in the Transition area to
perform the key priority transition. The transition is shown on the
Program monitor.