Examples – Grass Valley Karrera Video Production Center v.4.0 User Manual
Page 163
KARRERA — User Manual
163
Device Control Operations
line if a new keyframe is inserted or one is modified. This is consistent with
other work buffer parameters, but requires some discipline when working
with events. For other parameters, inserting keyframes without changing
values will result in no change between keyframes. But for events, this
same practice will result in reissuing the event at each keyframe. It is a good
practice to use the
Clear All Events
or
Clear Delegated Device Events
button after
inserting or modifying a keyframe containing external device events. This
prevents those same events from being duplicated when the next keyframe
is inserted.
Examples
Preparation for Control
1.
Turn on the
EXT DEV
button in the E-MEM & Timeline, Recall Run menu
(or whichever button your machine control device has been associated
with) and press the
EMEM Edit
button in the Master E-MEM area.
Note
Devices can be assigned to any level, including 1-8 which are provided as
hard buttons in the Master E-MEM area, in the User Setups, Suite Prefs,
E-MEM Prefs, Name Misc. Levels menu.
2.
Go to the Devices, Enables menu, and touch the device you wish to
enable in the Device Enables pane (left), and touch the
Enable Selected
button (or enable all using the
Enable All
button) in the Enables pane