Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 263)

KARRERA — User Manual 263
Transition Chaining
The Chain parameter data pads display each ME and either dashes (if
empty) or Keys 1-6 if keys are enabled for that ME in the chain (
Figure 142 ).
Figure 142. Key Chaining Menu
Once a keyer is enabled as part of a chain, the button is grayed out as each
key can only be part of one chain.
The Release ME Keys and Release All Keys buttons are provided to help manage
Key Chain configuration.
Using Key Cut/Auto Buttons
Pressing any of the K1 Cut - K6 Cut or K1 Auto - K6 Auto buttons in the Transition
area of an ME, with those keyers as part of a chain, will result in the fol-
lowing:
• Chained keyers on the same or different MEs all transition simultane-
ously,
• The transition rate of the button that is pressed (controlling keyer) is
applied to all the other (controlled) keyers in the chain.