Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 336)

336 KARRERA — User Manual
Section 7 — Advanced Operations
Figure 197. Record Button Enabled
The Video and Key Record Elements buttons allow you to route the Aux Bus
selections:
• Video Only—Video + Full Raster White,
• Key Only—Key + Key, and
• Video/Key—Video + Key.
• Set a Record Time using the Record Time button.
Note If an Aux Bus is not configured for the ClipStore output, the Video and Key
buttons will always be on.
These elements are also very useful for editing when you want to build or
join clips (see Editing Clips
on page 337 ). To set a record time, touch the Record
Time button and a pop-up keypad will appear to enter the desired value.
Touch Enter when finished.
To record a clip:
1. Touch to select the ClipStore channel for recording.
2. Touch the Record mode button.
3. Define the Record Elements you wish to apply to the clip to be
recorded.
4. Touch the Record Enable button.