Figure 78 – Grass Valley Karrera Video Production Center v.4.0 User Manual
Page 165
KARRERA — User Manual
165
Device Control Operations
2.
Go to the Timeline Events menu and touch the button of the desired
device to delegate the menu to that device (
Figure 78. Timeline Events Menu, Device Delegated
3.
Touch the
Load
button on the right.
4.
Touch the
Cue
button to enter the timecode:
•
If you want to play the clip from its starting point, it will automati-
cally cue to this location when loaded.
•
If you do not want to play the clip from its starting point, either cue
the device to the desired location or enter the timecode value man-
ually.
5.
Set up the Control Panel to the desired state, making sure the DDR
source is not selected on the PGM PST A bus.
6.
Learn this state to an E-MEM register as the first keyframe of the effect.
7.
Go to a point later in your effect giving sufficient time for the clip to
load and cue. For example, go to three seconds by pressing
GoTm
,
3
,
•
,
ENT
.
8.
Touch the
Clear Events
button in the Events pane to deselect the old
commands. This helps prevents accidental multiple load and cue
commands in the same effect.